|
|
FHP-Series filler units* are gear-type pumps constructed in polycarbonate and are available in single outlet configuration with 6-quart (5.5 liter) or 18-quart (17 -liter) capacity hoppers. The FHP-Series was designed as an alternative to the FS-Series by offering a similar high-pressure capability at a lower cost. This series is capable of metering a wide range of viscous products, with a high degreee of accuracy. the FHP- Series is compatible with P**, PS and PV-Series Power Bases.
*Filler unit is a complete unit (pump & hopper).
Filler Units lift on and off Power Bases - they are interchangable.
Different filler units can be used with one Power Base, assuming horsepower requirements are met.
**Models MKH and MKHX only.
F-SERIES | FHP-SERIES | FS-SERIES | RP-SERIES
|