RP-Series filler units* feature the same stainless steel construction and hopper capacities as the FS-Series. However, their distinguishing characteristic is the three-lobe impellers. This pump can dispense viscous products, containing particles up to the size of a 3/8" (10mm) diameter without crushing. The RP-Series is also used to dispense lumpy products as well as delicate products, which cannot be "overworked" while being pumped. These units are only available in a single outlet configuration and accept most spouts and accessories. The RP-Series must be used with the PS or PV-Series Power Bases.
*Filler unit is a complete unit (pump & hopper).
Filler Units lift on and off Power Bases - they are interchangable.
Different filler units can be used with one Power Base, assuming horsepower requirements are met.
F-SERIES | FHP-SERIES | FS-SERIES | RP-SERIES